THE PROS KNOW! GOT A QUESTION? TEXT US ANYTIME AT 336-705-8623
THE PROS KNOW! GOT A QUESTION? TEXT US ANYTIME AT 336-705-8623
Signed in as:
filler@godaddy.com
The Ultimate Pneumatic Smasher - Limited Edition is the Lamborghini of citrus smashers. Both the Lazer Raspberry and Shocker Yellow are stunning in the sunlight because of the metallic flakes in their colors.
Look at these premium features:
- Constructed from food grade materials including aluminum (non-food contact), stainless steel and Acetal Copolymer. No other lemon smasher manufacturer offers these construction materials as a combined option.
- The Acetal Coploymer and stainless steel we utilize is FDA and NSF Compliant. (Documentation on file)
- 1.5 inch pneumatic cylinder with rod wiper and stainless steel head nut.
- Square-grooved 3 inch food grade smasher head designed from Acetal Copolymer distributes forces across all citrus wedges because it spans 95 percent of the bottom of the deli cup. Other manufacturers utilize a 2 3/4 inch "sharkstook" or v-groove design smasher head which does not cover but approximately 80 percent of the bottom of the deli cup. Why is this important? Because, it covers all of the citrus wedges to smash evenly and releases the juice outward along the square grooves.
- Airtac toggle-style hand switch - pull back to lower plunger; push forward to raise plunger
- Airtac push to connect / release fittings
- Airtac flow control valve (1) to adjust plunger speed.
- Airtac polyurethane tubing for all air lines
- Radius corners on both top and bottom plates.
- Aluminum 4-post design not only saves weight, but also prevents cups from falling through the front.
- A unique funnel splash guard practically eliminates back-splash. We were the first to develop this type of "funnel" splash guard.
- Outer "wrap-around" LEXAN splash guard. (Make sure to leave approximately 1/4 inch between the bottom of the splash guard and the base plate of the smasher. This prevents the guard from potentially scratching the finish of the base plate.)
- 6 foot air attachment line to your air compressor or CO2 tank.
- All air lines and switch housing are located above the top plate so that cleaning underneath the top plate is easier. Most competitors locate their air lines and switch housing under the top plate exposing them to citrus splash.
- All screws, nuts, washers, adapters, splash guard, and side rods are comprised of either 316 / 304 Stainless Steel, Food Grade Aluminum, LEXAN or Acetal Copolymer. Even the rubber feet are BPA free.
The Ultimate Pneumatic Smasher is the best pneumatic citrus smasher money can buy. This citrus smasher is truly a piece of commercial equipment. And again, we don’t just manufacture them….we use them in our business every week.
NOTE: Colors are Shocker Yellow and Lazer Raspberry.
Design of equipment and / or component brands may change at the discretion of LemonadeSource.com at its sole discretion and without notice, but will still have the same application and quality standards.
Our pneumatic smasher plates have rounded corners which provides a much more finished appearance. Just look at that finish.
We place our hand switch housing and air lines above the top plate to mitigate any citrus splash from getting on them. This facilitates easier and faster cleaning.
We utilize Acetal Copolymer, an FDA / NSF compliant material in the construction of our smasher heads. This is coupled with a stainless steel jam nut and washer to ensure it does not loosen.
We see many competitors have square corners on their top and bottom plates.
We see many competitors choose to place their hand switch housing and some airlines beneath the top plate. We believe this makes it harder to clean and citrus splash could get on key parts.
We see many of our competitors utilize an aluminum smasher head.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.